Three Gable Post hotsell and Beam Pavilion Plan

This three gable post and beam pavilion plan uses metal connectors and structural screws to join the timbers, which means there are no mortises and tenons to cut. The heavy timbers create a sturdy structure. The knee braces are housed into the posts and secured with screws that are concealed with plugs. The posts are 8×8's, the plates are 8×12's and the ridges are 6×12's.

This three gable post and beam pavilion plan will enhance any landscape! The cross gable creates a dynamic focal point and adds a bit of extra covered space. At just under 515 square feet, there is plenty of room in this pavilion to accommodate many different activities! Its footprint is 12'8”x 36'8” with a 4'0” extension under the cross gable.

There is plenty of volume under the roof, with a ridge height of almost 14'4”. The top of the plates are 9'4” above the ground, and generous 2 foot overhangs provide plenty of shelter. This plan is designed to be mounted on a concrete slab with Timberlinx connectors.

When you purchase this plan you will receive a link to download the plan set pdfs. They are filled with all the information you need! The construction set contains 13 pages of fully dimensioned plan, section and elevation drawings , and detail drawings of complex areas. There are exploded and joined 3D drawings. The 40-page piece drawing set shows you each cut on every timber, fully dimensioned. We provide a timber list to make it easier to budget for and purchase your timbers, and we include a connector list as well. These plans are best printed on 11”x17” paper for construction purposes, but you can print them on letter paper for study purposes.

Important Information:

Timber Frame HQ provides plans for construction purposes but does not oversee the construction. The plan purchaser is responsible for assuring the plan meets local codes and regulations. It is the responsibility of the plan purchaser to obtain any and all structural analysis, engineering, and specifications that may be required in the municipality in which it is to be built. Plan purchaser is to verify all lot conditions and measurements before construction. Purchaser is responsible for additional expenses incurred in order to hotsell meet local code and engineering requirements.

Customer understands that the following conditions in your specific area may require additional engineering:

Wind / hurricane / tornado
Seismic / earthquake
Heavy snow
Flood potential
Soil instability
Timber Frame Engineering

Customer understands that HVAC, Plumbing & Electrical will not be included in all plans.

When you purchase a set of plans, you are purchasing a limited copyright license for a design giving you the right to build that structure one time at your location. Your copyright license was granted when you paid the purchase fee. You do not have the right to build the design a second time unless you have a signed agreement with Timber Frame HQ. Please note that copyright law protects “derivative works” the same as it protects the original design. That means that making some changes doesn't make it a new design. We do not allow modifications of our designs by others, without permission. Your copyright license does not allow another professional to represent our design work as their own.

Timber Frame HQ retains all common law, statutory and other reserved rights, including the copyright. This applies even when you have participated in the development of the design to a significant degree.