Hickory Pecan wood veneer sheet 48" x 96" with wood backer 1/25" thickness A grade quality. Hickory and Pecan are the same species. This species varies a lot in grain and color. It is sometimes uniform (all same color) but usually has a two tone of sap and heartwood, however each sheet is very different. You should expect it to be the species stated and have an open mind when it comes to this veneer. Wood backer is an alternative to paper backer and better at covering minor imperfections in surface and not as sensitive as paper backer. Less risk of bubbling though paper backer works fine when adhered properly. Ships in long narrow box with application instructions. Some photos may show other sizes, customer projects and wet or finished veneer.
Photos are representative and actual veneer sent will vary since this is a natural product. Pictures are miscellaneous Hickory/Pecan pictures and may not be 4 x 8 sheets. Just showing some of the various looks.
Visit My Store: JSO Wood Products
Other sizes, backers, and unbacked veneer may be available.
About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
Thickness: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40
Wood-backed veneers = 1/25
Raw plain veneer with no backing = 1/32-1/42
How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish: most any conventional finishing products can be used hotsell with veneer that is applied correctly.
Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldnt impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.
Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.
SKU:mx1_111085917076*
Product code: Hickory Pecan wood veneer sheet 48" x 96" with wood backer hotsell 1/25" thickness A