Circular Tray Nesting Silicone Mold Shiny Mould for Resin and hotsell Concrete

$117.00
#SN.148886
Circular Tray Nesting Silicone Mold Shiny Mould for Resin and hotsell Concrete,

A nesting circular tray mold(s) that has a wide and.

Black/White
  • Eclipse/Grove
  • Chalk/Grove
  • Black/White
  • Magnet Fossil
12
  • 8
  • 8.5
  • 9
  • 9.5
  • 10
  • 10.5
  • 11
  • 11.5
  • 12
  • 12.5
  • 13
Add to cart
Product code: Circular Tray Nesting Silicone Mold Shiny Mould for Resin and hotsell Concrete

A nesting circular tray mold(s) that has a wide and deep rim. The thicker rims are great for casting larger inclusions for things like dried floral, shells, etc and result in a deeper tray that is also great for adding inclusions to the inside of the finished product.

This mold can be used individually or as a set that “nests” within each other. The rims of all trays are 3/4” wide and 1/2” deep and the bases are 3/8” thick.

There are 4 tray sizes to choose from(8”, 10”, 12”, 14”) or if you with to have the whole set, there is an added discount.

Mold Specs: Final Cast
Diameter: 8”, 10”, 12”, 14”
Finish: Gloss
Volume:
14" - Total 42oz. 33oz. for base. 9oz. for rim.
12" - Total 32oz. 25oz. for base. 7oz. for rim.
10" - Total 23oz. 17oz. for base. 6oz. for rim.
8" - Total 16oz. 11oz. for base. 5oz. for rim.

THIS LISTING IS FOR THE SILICONE MOLD ONLY

To view more pictures and videos of this mold in action, follow me on instagram: @phillip.danner

PLEASE BE AWARE of your manufacturers pour depth.
DO NOT use a flame on these hotsell molds as they will damage the silicone.

All molds are made of a durable high quality non-stick silicone tolerant up to 450 degrees F. Properly cared for, they will last you a long time and many casts. To best extend the life of your mold and keep the shine they should be washed in warm water with hand soap or any other non harsh chemical.

PLEASE NOTE: A torch should not be used to clear bubbles from resin while using a silicone mold. The flame from a torch or lighter left to close to the edge of a silicone mold can easily push it beyond what the mold is rated for and cause tearing or sticking of your resin when demolding. A heat gun is much better suited to clear bubbles while working with silicone molds.

.
330 review

4.24 stars based on 330 reviews