Waterproof Infrared IR LEDs Night Vision Camera 850nm, for Scope hotsell w/ 4.3
Waterproof Infrared IR LEDs Night Vision Camera 850nm, for Scope hotsell w/ 4.3, Display sizet43 inchResolutiont480*272Scanning frequencyt60HzMinimum illuminationt00001 LUX/F12Signal to noise ratiot＞46dBOperating temperaturet-20℃-50℃Adapter battery 18650 Lithium battery No battery in.
Product code: Waterproof Infrared IR LEDs Night Vision Camera 850nm, for Scope hotsell w/ 4.3
Display sizet4.3 inch Resolutiont480*272 Scanning frequencyt60Hz Minimum illuminationt0.0001 LUX/F1.2 Signal to noise ratiot＞46dB Operating temperaturet-20℃-50℃ Adapter battery 18650 Lithium battery No hotsell battery in the package Infrared light 850mm Infrared lamp power 3W Maximum clamping range 45mm Commissioning of the Machine: 1.Secure the display and IR light on the optical sight with the pipe clamp. 2. Loosen the plastic screws (totally eight), and centrally fix the connecting tube in the rear of the eyepiece of the optical sight. 3. Turn on the machine and rotate the lens of the machine (inside the tube) to adjust the focus and adjust the cross line of optical sight to be clear. 4. Adjust the position of the connecting tube and tighten the screws till the cross line in the center of the display. And the commissioning of the machine is complete till now. 5.If the image is blurred caused by the different distances of the objects, the image clarity will be adjusted by side focus roller.
Display sizet4.3 inch Resolutiont480*272 Scanning frequencyt60Hz Minimum illuminationt0.0001 LUX/F1.2 Signal to noise ratiot＞46dB Operating temperaturet-20℃-50℃ Adapter battery 18650 Lithium battery No hotsell battery in the package Infrared light 850mm Infrared lamp power 3W Maximum clamping range 45mm Commissioning of the Machine: 1.Secure the display and IR light on the optical sight with the pipe clamp. 2. Loosen the plastic screws (totally eight), and centrally fix the connecting tube in the rear of the eyepiece of the optical sight. 3. Turn on the machine and rotate the lens of the machine (inside the tube) to adjust the focus and adjust the cross line of optical sight to be clear. 4. Adjust the position of the connecting tube and tighten the screws till the cross line in the center of the display. And the commissioning of the machine is complete till now. 5.If the image is blurred caused by the different distances of the objects, the image clarity will be adjusted by side focus roller.