Copper Flush Mount or Wall Sconce Light - UL Listed Option - Bare Bulb Edison Lamp - Industrial Minimalist Ceiling hotsell Mount Wall Mount

Copper Flush Mount Ceiling Light or Wall Sconce

The Lume

Clean lines and classic real copper, the Lume is as simple as it gets, but is also the most versatile. Hang from the ceiling for industrial overhead lighting, or from the wall as a minimalist sconce. The timeless look of copper is the perfect compliment for a reproduction Edison bulb, making this light a great accent to any vintage, classic, or modern design. Right at home in an industrial warehouse, barn, farmhouse, or city high rise.

Exposed Beam Application - Customize this light with a square base for mounting to exposed beams. We are happy to customize the size of the base for you, based on your needed dimensions. Please contact us with any custom requests.


SPECS:
Dimensions - Base, 5" diameter x 1/4" deep
Total height, 2 1/4"

Usage - The Lume is suitable for indoor or outdoor damp locations including bathrooms and porches. Outdoor use must be in a sheltered area, such as a wall with overhanging eave or covered porch.

Finish - When it comes to copper, it helps to visualize the stages of a penny to understand how the copper will patina as it ages. We offer three choices for your finish - natural, lacquered, or antique patina.
Natural Copper - Patinas to dark brown with some touches of green naturally over time, like an old penny. We love watching this process happen!
Lacquered Copper - Retains the bright pinkish hue of freshly cleaned copper, like a new penny.
Antique Copper Patina - Short on patience? Skip the wait and receive your Lume fixture already looking like a warm brown toned darkened penny with just enough copper color showing through so you'll know that it's actually the real thing.
hotsell
Electrical Type:
US Standard E26 socket - pictured, internal mounting with no visible mounting holes; not UL listed
US UL Listed E26 socket - external visible mounting holes and hardware (see Mounting #2 option below for more information)
International E27 socket - internal mounting with no visible hardware; uses CE or NSW approved electrical components; not CE or NSW listed


Max Wattage - What wattage bulb you should use depends on where you install your fixture. Here are the guidelines for the Lume:
Ceiling installation - 60 watts
Wall sconce installation - 100 watts

Bulbs - The Lume uses a regular E26 medium base (most common) size light bulb in incandescent or LED

Mounting - Hardwire, flush to receptacle in ceiling or wall, hardware included

*We can make this fixture in two ways, so that you can choose a mounting method:

1. As seen in the listing photo, the base of the light is solid, without any visible mounting holes. If we make it this way, the light will mount by a short threaded bolt that comes out from the back (it is attached to the electrical socket) and extends approximately 3/16" from the back of the light. This bolt screws into a threaded hole in the mounting bracket, which we supply. The bracket attaches to your electrical junction. First your electrician would mount the bracket, attach the electrical wires, then screw the fixture into the mounting bracket's threaded hole. This method does twist the wiring somewhat, but after just a few turns, the light should, in most cases, be flush to the ceiling or wall.

2. The other way the light can be mounted is with external mounting hardware. Two small holes can be pre-drilled into the fixture on either side of the copper tube that covers the electrical socket. Two mounting bolts with small finished decorative caps are sent along with your fixture, as well as a special mounting bracket that is threaded to receive the two mounting bolts. Your electrician would mount the bracket to the junction, thread the bolts into the bracket, wire the light and place the copper over the mounting bolts, then attach the caps.

In some situations, depending on your building's electrical wiring and local building codes, the second method may be the necessary way to mount the fixture. We are happy to build them either way for you, just let us know what you need.

Wire length included - 12"

Suitable for sheltered outdoor conditions

Fixture only, bulb not included



To see the rest of our designs, please browse through our shop here:
https://www.etsy.com/shop/Khalima?ref=si_shop

Or check out our official website here: http://www.khalimalights.com/p/home.html

Thank you for peeking in our shop. Handmade is made with love!