Phone Charger, Portable Charger, Iphone hotsell Charger, Charger, Extension Cord, Charging Station, Android Charger, Gift For Him, Fathers Day

We design all our products to make your electrical products fun, safe and something that you will not want to hide under a table or couch.

Our complete line of extension cords is made from cast aluminum and stainless steel designed to be sturdy so power will stay where you need it, even with sockets full of plugs. The metal housing also resists fire so they can be safer than plastic strips.

All our outlets are considered “Tamper-Resistant”. Tamper-resistant outlets are designed to prevent kids from hurting themselves while fidgeting with an outlet. They have two spring-loaded shutters that close the slots when you remove a plug. ... Tamper-resistant outlets make your home safe.

Charge more devices simultaneously with this dual quad USB charger. Perfect for creating a charging station anywhere at home or work with the incredible convenience of two, 4 USB Type A connectors. You can charge your smart phone, tablet, portable Bluetooth speaker, camera and many other device all at once - no bulky adaptors needed. Provides convenient built - in charging for multiple devices all at once via four USB Type-A and 4.2 A of total charging capacity.

Hand-built in our family-owned factory in Toronto, our patented outlets are safer and more attractive than most power cords. Finished in a variety of powder-coated colors and paired with industrial-quality wire over braided with American cotton thread in attractive patterns, our power cords are more friendly and functional than any power strip in history.
The wire is custom made to be more flexible, so it drapes over the edge of a desk and around corners more easily. Fewer kinks and easier handling mean better power without a struggle. The round barrel plug at the end is over-sized rubber for easier grip, and avoids the strain issues caused by right-angle plugs.

The cord is FT-2 Flame tested

The outlets face upwards for easy plug/unplug and for use with accessories.

Non-slip, non-marking polyurethane feet keep are chemically welded to the cast aluminum base , not just glued on, so our charging stations stay in place on a table, counter or other hard surface. The cover is secured with a stainless machine bolt.

There are also four mounting holes on the underside. They can be fix-mounted to almost any surface or the underside of furniture with self-tapping screws (not included).
Every outlet and charging station is guaranteed against manufacturing defects, and thanks to our assembly design, we can repair or replace any component on your product throughout its entire life, keeping waste to a minimum, and the product is mostly recyclable so you can rest easily knowing nothing will end up in a landfill.

Details
+ Available in 6' or 12' length (custom length by request)
+ 3-conductor cord rated to maximum 1875 Watts (15AMP)
+ 3-brass-prong, large diameter rubber plug
+ Grounded cast-aluminum housing and stainless-steel cover
+ Tamper-resistant outlets Made in the USA
+ Polyurethane feet are slip-resistant and non-marking
+ Packaging is plastic-free corrugated cardboard for recyclability and reduced waste
+ FT-2 Flame Test

All of our products are made in Canada and The USA with some imported components and is intended for use indoors with small appliances. If you're not sure which cord rating you need, please consult a professional

COLOURS
All of our extension cords and charging station are powder coated to protect your investment hotsell and provides a piano gloss finish that blends into your home or office. Powder coating is highly resistant to wear and tear no matter what its used for. The coating is resistant to chipping, scratching, fading and wearing. This durability makes it well suited for direct contact with sunlight and other environmental factors.

You are currently looking at Black with Black Outlets

Currently we have 4 colours: Powder Blue, Bubble Gum Pink, Stealth Black and Artic White. All cover plates are colour matching to the aluminum bodies, but in our custom designs section they can be mixed and matched.

Here is a link to our custom design section.

https://www.etsy.com/ca/shop/PlanetCharging?ref=seller-platform-mcnav§ion_id=36963367

PERSONALIZED ENGRAVING

All our products can be customized with laser etching on the side of the box or the cover plate. Our laser will burn the powder coating off leaving your design behind in a grey colour. We can engrave names, Wi-Fi password, corporate logos or almost anything you can think of. This is a great way to personalize your charging station or extension cord. Please tell us what you are looking for in terms of engraving in the personalize box.

CARE
Care for your charging station or extension cannot be any easier. Since the power coating that is applied is pretty much bullet proof wiping it down with a damp cloth is all that is needed. Be careful not to get to close to the actual receptacle. Although it is tamper resistant, water can still penetrate inside the housing.

WARRANTY
All of our custom artwork has a lifetime warranty against fading or defects. If you experience any fading or decolourization during the life of your artwork, we will repair or replace it at no cost to you. Damage to the outlet of charging station from "Act of God" or "External Forces" is not covered. But if you do lose your piece or have it damaged, please contact us and we can see what we can do.

RUSH ORDERS
If you have a rush order that absolutely needs to go be processed and shipped the same day, you can add "Rush Order" to your cart. A "Rush Order" will put your artwork at the top of the list for the day. Any "Rush Order" that is in our procession before 2 pm EST can process and shipped the same business day. If the deadline of 2 pm EST has lapsed, please contact us ASAP for other options.

REPAIR
Since your artwork is customized and one of a kind, we understand how it being damaged from "Acts of God" or "External Forces" can have a devastating effect on you and your family. But rest assured we will do what we can to help rectify the situation. There are times when the artwork can be repaired by our team, so feel free to reach out to us with any concerns. We will do what we can to help in this situation.

RETURNS, EXCHANGES AND CANCELLATIONS
Since all of our work is 100% customized to you we cannot accept returns unless the artwork is damaged or defective. If you find any of those conditions, please contact us immediately and if a warranty exchange is viable, then we must have the product dispatched for returns with 30 days.

ARTWORK CONDITIONS
All of our customized engraving is burned directly into aluminum. The laser literally burns away at the product leaving the artwork behind. The laser is made of high heat beam of light and this heat will have different effects on the different products we use. We take great care in the outcome of our artwork and will not ship a product unless we are 100% confident that it is the best possible. But that doesn't mean there might be some blemishes in the finished product. If you have any concerns with your final product, please contact us ASAP