Silicone hotsell Two-component Kit, 1020 g, Addition Cure Silicone, 5 Different Shore Hardness

You get 1020 grams of 5 different addition cure silicone resins with 5 different hardness.


Each of them has a minimum of 200 grams from which you can make moulds of remarkable sized figures, model parts, mock-ups etc.


With this package you can solve almost every problem that could emerge at building silicone mould!

In the package, you certainly find the appropriate silicone resin (with the desired technical parameters) you need or you can create the combination of those to archive special purposes.


Our offer also includes a silicone with 60 Shore A hardness which we deliver in the weight of 220g which is the smallest pack that is available on the retail market.

The main properties of the vulcanized product are:

•High chemical resistance to the aggressive components of some types of resin;
•Extremely high tear strength (this feature guarantees high resistance to wear and tear);
•High accuracy in reproducing very small details;
•High dimensional stability in time and indeformability;
•Remarkable resistance to high temperatures and aging;
•Excellent anti-stick effect.


Main Fields of Application:

•Mould-making and model-making (for its remarkable reproduction accuracy, high dimensional
hotsell stability and high mechanical strength).
•Art ceramic (for its remarkable reproduction accuracy, high mechanical strength)
•Sanitary ware (for its remarkable reproduction accuracy, high mechanical strength)


The exact proportions 1 : 1 (exception is the ZAX 60 where the mixing ratio 1:10 applies) must be respected to obtain the correct times and not to alter the final characteristics of the product.

The surfaces with which the material enters in contact must be perfectly clean, free of grease and dry.

The working time and thus the setting time are reduced if the temperature exceeds 23°C (ex. If the temperature is 40°C, the working time is halved and the setting time is approximately halved). If the temperature is less than 23°C both the working time and setting time increase considerably.

If the temperature is 4°C, the working time doubles and the Setting time increases three times the minutes indicated at 23°C.